Home > Low voltage power cables, halogen free, flame retardant

Low voltage power cables, halogen free, flame retardant

Uo/U - 300/500 V DIN VDE 0250 part 214
The power insulated conductors flame retardant, with low halogen free smoke emission and corrosion at fire conditions are suitable for use in electrical installations for Uo/U 300/500 V in:
 
important objects - power stations (nuclear, thermal), transformer substations, metro, airport,
public buildings - hospitals, hotels, theaters, cinemas, public and commercial centers, places with great concentration of people and material values whose safety in case of fire should be  guaranteed.
 
The conductors are designed for laying over, in and under plasters in dry and wet premises as well as in brickwork"s and concrete. They are also suitable for outdoor use. The conductors should not be laid directly in vibro concrete or rammed concrete and directly under ground.
 
0.00 лв.
Uo/U - 0.6/1 kV DIN VDE 0266
The power cables with retaimnent of insulation 180 min. flame retardant, with low halogen free smoke emission and corrosion at fire conditions are suitable for used in electrical installations for break-downsupply, signalization and control in:
 
important objects - power stations (nuclear, thermal), transformer substations, metro, airport public buildings - hospitals, hotels, theaters, cinemas,public and commercial centers, places with great concentration of people and material values whose safety in case of fire should be guaranteed.

The cables are designed for fixed laying in dry and wet premises and outdoor, but not directly underground or in water. Laying in cable duct is allowed in case precautions are taken no water collection in the duct to be guaranteed.
 
 
0.00 лв.
Uo/U - 0.6/1 kV BS 6724 - 1997
Cu conductors • XLPE insulation • LSF sheath • Armour Al. wires • LSF sheath
 
The single-core power cables with insulation of cross-linked polyethylene (XLPE) type LSOH are flame retardant, with low halogen free smoke emission and corrosion at fire conditions and are suitable for use in electrical installations for nominal voltage Uo/U 0.6/1 kV.
 
Cables are designed with sheath, which do not contain halogen materials, flame retardant, free smoke emission and corrosion, and non-magnetic armor of Al wires. They are suitable for use in distribution networks, electrical power stations and substations.
 
These cables are for fixed assembly in lines with unlimited difference levels, for laying in industrial sites, indoor installations, in cable ducts, conduits and shafts, over shelves and grills and outdoor shelter.
 
0.00 лв.
Uo/U - 0.6/1 kV VDE 0276-604 (HD 604 S1)
 
The power cables flame retardant, with low halogen free smoke emission and corrosion at fire conditions are suitable for use in elec¬trical installations for nominal voltage 0.6/1kV in:
 
important objects - power stations (nuclear, thermal), transformer substations, metro, airport, public buildings - hospitals, hotels, theaters, cinemas, public and commercial centers, places with great concentration of people and material values whose safety in case of fire should be guaranteed.
 
The cables can be laid indoor, in air or in concrete. Direct laying underground or in water is not allowed.
 
0.00 лв.
Uo/U - 0.6/1 kV IEC 60 502-1 and VDE 0276-604 (HD 604 S1)
The power cables flame retardant, with low halogen free smoke emission and corrosion at fire conditions are suitable for use in elec­trical installations for nominal voltage 0.6/1kV in: 
 
important objects - power stations (nuclear, thermal), transformer substations, metro, airport, public buildings - hospitals, hotels, the­aters, cinemas, public and commercial centers, places with great concentration of people and material values whose safety in case of fire should be guaranteed.
 
The cables can be laid indoor, in air or in concrete. Direct laying underground or in water is not allowed.
0.00 лв.
Uo/U  - 0.6/1 kV BS 6724-1997
The power and control cables with insulation of cross-linked polyethylene (XLPE) type LSOH are flame retardant, with low halogen free smoke emission and corrosion at fire conditions and are suitable for use in electrical installations for nominal voltage Uo/U 0.6/1 kV. Cables are designed with sheath of halogen free materials, flame retardant, free smoke emission and corrosion, and non-mag¬netic armor of Al wires.
 
They are suitable for use in distribution networks, electrical power stations (NPP and TPP) and substations, metro. These cables are for fixed assembly in lines with unlimited difference levels, for laying in industrial sites, indoor installations, in cable ducts, conduits and shafts, over shelves and grills and outdoor shelter.
0.00 лв.
Uo/U - 0.6/1 kV VDE 0276-604 (HD 604 S1)
Application:
The power cables flame retardant, with low halogen free smoke emission and corrosion at fire conditions are suitable for use in electrical installations for nominal voltage 0.6/1kV in:
 
important objects - power stations (nuclear, thermal), transformer substations, metro, airport, public buildings - hospitals, hotels, theaters, cinemas, public and commercial centers, places with great concentration of people and material values whose safety in case of fire should be guaranteed. The cables can be laid indoor, in air or in concrete. Direct laying underground or in water is not allowed
 
0.00 лв.
Uo/U - 0.6/1 kV IEC 60502-1 and VDE 0276-604 (HD 604 S1)
Application:
The power cables flame retardant, with low halogen free smoke emission and corrosion at fire conditions are suitable for use in electrical installations for nominal voltage 0.6/1kV in:
 
important objects - power stations (nuclear, thermal), transformer substations, metro, airport, public buildings - hospitals, hotels, theaters, cinemas, public and commercial centers, places with great concentration of people and material values whose safety in case of fire should be guaranteed.
 
The cables can be laid indoor, in air or in concrete.
Direct laying underground or in water is not allowed.
0.00 лв.